This is an old revision of the document!
# 3×3
set terminal png enhanced font “Arial,30” size 3200,2457.6 set output 'output.tif' set multiplot layout 3,3
########################################################################
#set xlabel ' {/Arial-Bold=60 Z [Å]}' unset xlabel set ylabel '{/Arial-Bold=50 Electron Density [Å^{-3}]}' set xtics font “Arial-Bold,50” set ytics font “Arial-Bold,50” set border lw 3 set bar 0 #set xtics -40,10,40 unset xtics set format y “%.1f” set ytics 0,.1,.3 set ytics nomirror set mytics 2
# set key samplen (line width) and then key box setting: spacing….
unset key
# set key font “,40”
set origin 0,.615
set tmargin 3
set bmargin 0
set lmargin 14
set rmargin 0
# set xzeroaxis
set pointsize 1
set label “a” at -23,.27 font “Arial-Bold,100”
# show margin
plot [-31:31] [0:0.35] \
'd13.txt' using 1:2 with line lw 8 lc rgb 'navy' title '{/Arial-Bold=50 CH2}', \
using 1:3 with line lw 8 lc rgb '#008000' title '{/Arial-Bold=50 CH3}', \
using 1:12 with line lw 8 lc rgb '#FFD700' title '{/Arial-Bold=50 Wat}'
unset label
########################################################################
#set xlabel ' {/Arial-Bold=60 Z [Å]}' unset xlabel #set ylabel '{/Arial-Bold=50 Electron Density [Å^{-3}]}' unset ylabel set xtics font “Arial-Bold,50” #set ytics font “Arial-Bold,50” set border lw 3 set bar 0 #set xtics -40,10,40 unset xtics set format y “%.1f” #set ytics 0,.1,.3 unset ytics set mytics 2
# set key samplen (line width) and then key box setting: spacing….
unset key
# set key font “,40”
set origin .333,.615
set tmargin 3
set bmargin 0
set lmargin 0
set rmargin 15
# set xzeroaxis
set pointsize 1
set label “b” at -23,.27 font “Arial-Bold,100”
# show margin
plot [-31:31] [0:0.35] \
'6d13.txt' using 1:2 with line lw 8 lc rgb 'navy' title '{/Arial-Bold=50 CH2}', \
using 1:3 with line lw 8 lc rgb '#008000' title '{/Arial-Bold=50 CH3}', \
using 1:12 with line lw 8 lc rgb '#FFD700' title '{/Arial-Bold=50 Wat}'
unset label ########################################################################
#set xlabel ' {/Arial-Bold=60 Z [Å]}' unset xlabel #set ylabel '{/Arial-Bold=50 Electron Density [Å^{-3}]}' unset ylabel set xtics font “Arial-Bold,50” #set ytics font “Arial-Bold,50” set border lw 3 set bar 0 #set xtics -40,10,40 unset xtics set format y “%.1f” #set ytics 0,.1,.3 unset ytics set mytics 2
# set key samplen (line width) and then key box setting: spacing….
set key at 58,.35
set key vertical samplen 4 spacing 2 width 1 height 1
# set key font “,40”
set origin .553,.615
set tmargin 3
set bmargin 0
set lmargin 0
set rmargin 15
# set xzeroaxis
set pointsize 1
set label “c” at -23,.27 font “Arial-Bold,100”
# show margin
plot [-31:31] [0:0.35] \
'c16.txt' using 1:2 with line lw 8 lc rgb 'navy' title '{/Arial-Bold=50 CH2}', \
using 1:3 with line lw 8 lc rgb '#008000' title '{/Arial-Bold=50 CH3}', \
using 1:8 with line lw 8 lc rgb '#FFD700' title '{/Arial-Bold=50 Wat}'
unset label ########################################################################
#set xlabel ' {/Arial-Bold=60 Z [Å]}'
unset xlabel
set ylabel '{/Arial-Bold=50 Electron Density [Å^{-3}]}'
set xtics font “Arial-Bold,50”
set ytics font “Arial-Bold,50”
set border lw 3
set bar 0
#set xtics -40,10,40
unset xtics
set format y “%.1f”
set ytics 0,.1,.3
set mytics 2
set ytics nomirror
# set key samplen (line width) and then key box setting: spacing….
unset key
# set key font “,40”
set origin 0,.333
set tmargin 3
set bmargin 0
set lmargin 14
set rmargin 0
# set xzeroaxis
set pointsize 1
set label “d” at -23,.27 font “Arial-Bold,100”
# show margin
plot [-31:31] [0:0.35] \
'd6.txt' using 1:3 with line lw 8 lc rgb 'navy' title '{/Arial-Bold=50 CH2}', \
using 1:4 with line lw 8 lc rgb '#008000' title '{/Arial-Bold=50 CH3}', \
using 1:13 with line lw 8 lc rgb '#FFD700' title '{/Arial-Bold=50 Wat}'
unset label
########################################################################
#set xlabel ' {/Arial-Bold=60 Z [Å]}'
unset xlabel
#set ylabel '{/Arial-Bold=50 Electron Density [Å^{-3}]}'
unset ylabel
#set xtics font “Arial-Bold,50”
#set ytics font “Arial-Bold,50”
set origin .333,.333
set tmargin 3
set bmargin 0
set lmargin 0
set rmargin 15
#set xtics -40,10,35
unset xtics
set format y “%.1f”
#set ytics 0,.1,.3
unset ytics
set mytics 2
set label “e” at -23,.27 font “Arial-Bold,100”
unset key
plot [-31:31] [0:0.35] \
'6d6.txt' using 1:3 with line lw 8 lc rgb 'navy' title '{/Arial-Bold=50 CH2}', \
using 1:4 with line lw 8 lc rgb '#008000' title '{/Arial-Bold=50 CH3}', \
using 1:13 with line lw 8 lc rgb '#FFD700' title '{/Arial-Bold=50 Wat}'
unset label
########################################################################
#set xlabel ' {/Arial-Bold=60 Z [Å]}'
unset xlabel
#set ylabel '{/Arial-Bold=50 Electron Density [Å^{-3}]}'
unset ylabel
#set xtics font “Arial-Bold,50”
#set ytics font “Arial-Bold,50”
set origin .553,.333
set tmargin 3
set bmargin 0
set lmargin 0
set rmargin 15
#set xtics -40,10,35
unset xtics
set format y “%.1f”
#set ytics 0,.1,.3
unset ytics
set mytics 2
set label “f” at -23,.27 font “Arial-Bold,100”
unset key
plot [-31:31] [0:0.35] \
'c6.txt' using 1:3 with line lw 8 lc rgb 'navy' title '{/Arial-Bold=50 CH2}', \
using 1:4 with line lw 8 lc rgb '#008000' title '{/Arial-Bold=50 CH3}', \
using 1:9 with line lw 8 lc rgb '#FFD700' title '{/Arial-Bold=50 Wat}'
unset label
########################################################################
set xlabel ' {/Arial-Bold=60 Z [Å]}'
set ylabel '{/Arial-Bold=50 Electron Density [Å^{-3}]}'
set xtics font “Arial-Bold,50”
set ytics font “Arial-Bold,50”
set tmargin 0
set bmargin -6
set lmargin 14
set rmargin 0
set xtics -40,10,30
set ytics 0,.1,.3
set ytics nomirror
set xtics nomirror
set mytics 2
set label “g” at -23,.27 font “Arial-Bold,100”
unset key
set border lw 3
set bar 0
plot [-31:31] [0:0.35] \
'p.txt' using 1:3 with line lw 8 lc rgb 'navy' title '{/Arial-Bold=50 CH2}', \
using 1:4 with line lw 8 lc rgb '#008000' title '{/Arial-Bold=50 CH3}', \
using 1:13 with line lw 8 lc rgb '#FFD700' title '{/Arial-Bold=50 Wat}'
unset label
########################################################################
########################################################################
set xlabel ' {/Arial-Bold=60 Z [Å]}'
#set ylabel '{/Arial-Bold=50 Electron Density [Å^{-3}]}'
unset ylabel
set xtics font “Arial-Bold,50”
#set ytics font “Arial-Bold,50”
set tmargin 0
set bmargin -6
set lmargin 0
set rmargin 15
set xtics -20,10,40
set xtics nomirror
#set ytics 0,.1,.3
unset ytics
set mytics 2
set label “h” at -23,.27 font “Arial-Bold,100”
unset key
plot [-31:31] [0:0.35] \
'6p.txt' using 1:3 with line lw 8 lc rgb 'navy' title '{/Arial-Bold=50 CH2}', \
using 1:4 with line lw 8 lc rgb '#008000' title '{/Arial-Bold=50 CH3}', \
using 1:13 with line lw 8 lc rgb '#FFD700' title '{/Arial-Bold=50 Wat}'
unset label
########################################################################
set xlabel ' {/Arial-Bold=60 Z [Å]}'
#set ylabel '{/Arial-Bold=50 Electron Density [Å^{-3}]}'
unset ylabel
set xtics font “Arial-Bold,50”
#set ytics font “Arial-Bold,50”
set origin .553,0
set tmargin 0
set bmargin -6
set lmargin 0
set rmargin 15
set xtics -20,10,40
set xtics nomirror
#set ytics 0,.1,.3
unset ytics
set mytics 2
set label “i” at -23,.27 font “Arial-Bold,100”
unset key
plot [-31:31] [0:0.35] \
'c16.txt' using 1:2 with line lw 8 lc rgb 'navy' title '{/Arial-Bold=50 CH2}', \
using 1:3 with line lw 8 lc rgb '#008000' title '{/Arial-Bold=50 CH3}', \
using 1:8 with line lw 8 lc rgb '#FFD700' title '{/Arial-Bold=50 Wat}'
unset label